Interface Practices Subcommittee
AMERICAN NATIONAL STANDARD
ANSI/SCTE 77 2017
Specifications for Underground Enclosure Integrity
ANSI/SCTE 77 2017
AMERICAN NATIONAL STANDARD SCTEISBE 2
The Society of Cable Telecommunications Engineers (SCTE) / International Society of Broadband Experts (ISBE) Standards and Operational Practices (hereafter called documents) are intended to serve the public interest by providing specifications, test methods and procedures that promote uniformity of product, interchangeability, best practices and ultimately the long-term reliability of broadband communications facilities. These documents shall not in any way preclude any member or non-member of SCTEISBE from manufacturing or selling products not conforming to such documents, nor shall the existence of such standards preclude their voluntary use by those other than SCTEISBE members.
SCTEISBE assumes no obligations or liability whatsoever to any party who may adopt the documents. Such adopting party assumes all risks associated with adoption of these documents, and accepts full responsibility for any damage and/or claims arising from the adoption of such documents.
Attention is called to the possibility that implementation of this document may require the use of subject matter covered by patent rights. By publication of this document, no position is taken with respect to the existence or validity of any patent rights in connection therewith. SCTEISBE shall not be responsible for identifying patents for which a license may be required or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention.
Patent holders who believe that they hold patents which are essential to the implementation of this document have been requested to provide information about those patents and any related licensing terms and conditions. Any such declarations made before or after publication of this document are available on the SCTEISBE web site at http://www.scte.org.
All Rights Reserved
Society of Cable Telecommunications Engineers, Inc. 2017 140 Philips Road Exton, PA 19341http://www.scte.org/
ANSI/SCTE 77 2017
AMERICAN NATIONAL STANDARD SCTEISBE 3
Table of Contents Title Page Number NOTICE ___________________________________________________________________________ 2
Table of Contents ___________________________________________________________________ 3 1. Introduction ___________________________________________________________________ 5
1.1. Executive Summary ______________________________________________________ 5 1.2. Scope _________________________________________________________________ 5 1.3. Benefits ________________________________________________________________ 5 1.4. Intended Audience _______________________________________________________ 5 1.5. Areas for Further Investigation or to be Added in Future Versions ___________________ 5
2. Normative References ___________________________________________________________ 6 2.1. Standards from Other Organizations _________________________________________ 6
3. Informative References __________________________________________________________ 6 3.1. Published Materials _______________________________________________________ 6
4. Compliance Notation ____________________________________________________________ 7 5. Definitions ____________________________________________________________________ 7See Also"Disposizioni per la formazione del bilancio annuale e pluriennale dello Stato (legge finanziaria 2007)"Solutions - Cisco SD-WAN vEdge Routers Data SheetStud Bolt for Flanges (ASME B16.5) - Projectmaterials
5.1. Definitions ______________________________________________________________ 7 6. Environmental Test _____________________________________________________________ 7
6.1. Control Coupons _________________________________________________________ 7 6.2. Chemical Resistance _____________________________________________________ 8 6.3. Simulated Sunlight Exposure _______________________________________________ 8 6.4. Water Absorption ________________________________________________________ 8 6.5. Flammability ____________________________________________________________ 8 6.6 Internal Equipment Protection Test ___________________________________________ 9
7. Structural Load Tests on Full-Size Products __________________________________________ 9 7.1. Lateral Sidewall Load Test ________________________________________________ 10 7.2. Vertical Sidewall Load Test ________________________________________________ 10 7.3. Cover Vertical Load Test __________________________________________________ 10 7.4. Loading Acceptance Criteria _______________________________________________ 11 7.5. Cover Impact ___________________________________________________________ 11 7.6. Coefficient of Friction Test ________________________________________________ 11 7.7. Torque Value of Fastening Devices _________________________________________ 11
ANSI/SCTE 77 2017
AMERICAN NATIONAL STANDARD SCTEISBE 4
List of Figures
Title Page Number Figure 1 Torque Test Setup for Threaded Inserts and Bolts 12
Figure 2 - Cover Vertical Load Test (Pedestrian, Tiers 5, 8, & 15) 13
Figure 3 - Cover Vertical Load Test (Tier 22) 13
Figure 4 - Cover Vertical Load Test for Multiple Covers (Center of Cover) (Pedestrian, Tiers 5, 8, & 15) 14
Figure 5 - Cover Vertical Load Test for Multiple Covers (Center of Partial Cover) (Pedestrian, Tiers 5, 8, & 15) 14
Figure 6 - Cover Vertical Load Test for Multiple Covers (Center of Cover) (Tier 22) 15
Figure 7 - Cover Vertical Load Test for Multiple Covers (Center of Partial Cover) (Tier 22) 15
Figure 8 - Box Vertical Sidewall Load Test (Pedestrian, Tiers 5, 8 & 15) 16
Figure 9 - Box Vertical Sidewall Load Test (Tier 22) 16
Figure 10 - Vertical Sidewall Load Test for Round Enclosures (Pedestrian, Tiers 5, 8, & 15) 17
Figure 11 - Vertical Sidewall Load Test for Round Enclosures (Tier 22) 17
Figure 12 - Box Lateral Sidewall Test for Boxes < 60 Long 18
Figure 13 - Box Lateral Sidewall Test for Boxes 60 long 18
Figure 14 - Lateral Sidewall Test for Round Enclosures 24 in Depth 19
Figure 15 - Lateral Sidewall Test for Round Enclosures < 24 in Depth 19See AlsoDer ASME Y14.5 GD&T Standard | GD&T GrundlagenWorkstations for simulation (FEA) - DEVELOP3DANSYS Fluent in ANSYS Workbench Users Guide - [PDF Document]
List of Tables Title Page Number Table 1 Reagent/Concentration in Water 8
Table 2 - Design/Test Loads 9
Table 3 Maximum Allowable Deflection at Design Load 11
Table 4 Recommended Torque Values 12
ANSI/SCTE 77 2017
AMERICAN NATIONAL STANDARD SCTEISBE 5
1.1. Executive Summary
The purpose of this document is to establish the performance requirements for underground enclosures. The document provides Standards Engineers and Systems Designers a means of evaluating underground enclosure performance regardless of the materials used or the methods employed in the manufacture of the enclosures.
The scope of this document covers conformance tests and requirements for the integrity of grade-level enclosures containing telecommunication or other low voltage apparatus that may be exposed to the public.
The purpose of this document is to describe the requirements for a comprehensive integrity system for grade-level enclosures providing long installation life and minimal maintenance. This document is intended to provide guidance for the use of enclosures in non-deliberate traffic areas. Requirements for enclosures in deliberate traffic areas are covered by American Association of State Highway and Transportation Officials (AASHTO).
1.3. Benefits Underground enclosures are designed and used for a variety of applications: slack cable, junction enclosures, and splice enclosures, etc. This document provides the specifier and end user the minimum performance criteria needed to ensure that the enclosure is designed for the outside plant application. Without this document there are no performance requirements for outside plant enclosures, and the long term integrity of the system may be compromised. This document helps specifying individuals design the outside plant and establish enclosure performance requirements throughout the system. The document will serve as a method to ensure long term enclosure integrity as more outside plant systems are installed underground.
1.4. Intended Audience A Standard Engineer or System Designer will be able to use this document to evaluate products from a variety of manufacturers and specify the best product for the application. It is intended to be used by a large cross section of individuals not just those with engineering backgrounds. The test methods and accompanying figures are intended to guide the individual through the process in a logical manner.
1.5. Areas for Further Investigation or to be Added in Future Versions Areas of future investigation include:
Adding a section dedicated to installation applications Adding a section dedicated to installation details Adding a section for hybrid type installations to help others benefit from work being done across
ANSI/SCTE 77 2017
AMERICAN NATIONAL STANDARD SCTEISBE 6
2. Normative References The following documents contain provisions, which, through reference in this text, constitute provisions of the standard. At the time of Subcommittee approval, the editions indicated were valid. All standards are subject to revision; and while parties to any agreement based on this standard are encouraged to investigate the possibility of applying the most recent editions of the documents listed below, they are reminded that newer editions of those documents may not be compatible with the referenced version.
2.1. Standards from Other OrganizationsSee AlsoANSI Table of Fits - [PDF Document]Top 5 : Best open source PDF generation libraries for PHPAnsi Mh16.1 2012(r2019).pdf [8lyrvmjyn20d]
1. ASTM D543-14 Standard Practices for Eva
ANSI/SCTE 77 2017 77 2017...Attention is called to the possibility that implementation of this document may require the use of subject matter covered by patent rights. By publication - [PDF Document] (2022)
You might also like
Key Stock and Machine Key Quick Reference Guide
ANSI C136 Series - Standards for Roadway and Area Lighting Equipment
Dublin Core™ Metadata Element Set, Version 1.1: Reference Description
Buckling Calculator — Column Buckling
Best CAD Software With Finite Element Analysis Tools | Fractory
Fastener Standards and ASTM Bolts Nuts specification
Stainless Steel Countersunk Bolts And Nuts
ANSYS Fluent Theory Guide - [PDF Document]
Japanese Martial Art
Bebe Home Decor Wall Art
[$109.99] projecteur hd 1080p natif 1280x720p mini projecteur wi-fi 150 ansi lumen luminosité projecteur de cinéma extérieur portable mise en miroir sans fil par câble wifi / usb pour android / ordinateurs portables / fenêtres
BOMAKER 150 ANSI LUMEN WI-FI PROJECTEUR PROPRE-FI Full HD 1080P Miroir sans fil - S5, Gris
Mi 4K Laser Projector 150”
Review: Ansys Mechanical R18 - DEVELOP3D
Ansys Mechanical Enterprise - INAS S.A.
Ansys Mechanical vs. Enterprise Dynamics Comparison
ANSYS CFX Solver Theory Guide - [PDF Document]
INFO - Ansys Hardware Recommendations & Supported 3rd Party Software
ANSYS Mechanical APDL Theory Reference 15.pdf - [PDF Document]
ANSYS Mechanical APDL Performance Guide - VSIP.INFO
Author: Terrell Hackett
Last Updated: 09/22/2022
Rating: 4.1 / 5 (52 voted)
Reviews: 83% of readers found this page helpful
Name: Terrell Hackett
Address: Suite 453 459 Gibson Squares, East Adriane, AK 71925-5692
Job: Chief Representative
Hobby: Board games, Rock climbing, Ghost hunting, Origami, Kabaddi, Mushroom hunting, Gaming
Introduction: My name is Terrell Hackett, I am a gleaming, brainy, courageous, helpful, healthy, cooperative, graceful person who loves writing and wants to share my knowledge and understanding with you.