NFPA 54/ANSI Z223.1, National Fuel Gas Code (2023)

  • Improve public safety by referencing NFPA 54/ANSI Z223.1, 2021 edition, for the latest criteria for the acceptable use of gas in homes and buildings.

    From carbon monoxide poisoning to the risks of fire and explosion, there are many hazards inherent with the utilization of gaseous fuels. NFPA 54 offers comprehensive provisions for the safe design, installation, operation, maintenance, purging, and inspection of gas piping, equipment, accessories, and appliances supplied with fuel gas.

    The code covers:

    • Piping system design, materials, and components
    • Pipe sizing and installing pipes underground, aboveground, and inside concealed spaces
    • Piping inspection, testing, system leak check, and purging
    • Requirements for process air and installation of appliances
    • Minimum safe performance criteria, general requirements, and specifications for venting combustion products.

    Take confidence you are up to date with the latest information on fuel gas installations by referencing the new NFPA 54.

    The National Fuel Gas Code is the cumulative result of the vast knowledge of a broad range of stakeholders and organizations with expertise in gas piping and equipment and the use of gaseous fuels. An industry-accepted standard, the recently amended NFPA 54 features significant changes and additions to account for state-of-the-art equipment, practices, materials, trends, and technology.

    Changes to the 2021 edition include:

    • Revisions in Chapter 10 requiring appliances to be listed to and in compliance with the appropriate ANSI/CSA appliance listing standard
    • Addition of a table for through the wall vent terminal clearances to Chapter 12, along with an associated annex figure that coordinates this code with the clearances in ANSI product standards
    • Definition of engineering methods in Chapter 4 to provide guidance to authorities having jurisdiction on acceptable methods, eliminating the need to approve all engineering methods used individually
    • Revised and reorganized electric isolation requirements for gas piping installation to better reflect where the dielectric union is to be installed in the system and what it is protecting

    Make sure you have the most current provisions to help ensure fuel gas safety on consumer premises.

    Help protect lives and property from fuel gas dangers by purchasing your copy of NFPA 54/ANSI Z223.1, National Fuel Gas Code, 2021 edition.

  • THE NFPA HANDBOOKS DIFFER FROM CODES AND STANDARDS

    Ever wonder what the difference is between an NFPA® handbook and a code or standard? We’re glad you asked.

    NFPA codes and standards both provide requirements for achieving outcomes. Handbooks take a deeper dive, providing the full text of a code or standard as well as expert commentary and features such as graphics, decision trees, testing procedures, case studies, sample forms and checklists, and other helpful aids to give a better understanding of the reasoning behind the requirements and how to apply them.

    (Video) N.E.S.T NFPA 54 Chimney Charts

    JUST REMEMBER:

    • A code or standard is a framework—a set of rules to follow with a goal to achieve a certain result
    • A handbook is a connector—linking requirements to application by helping you understand the reasoning behind a code or standard

    The simplest way to think about it is that codes and standards list the technical requirements while handbooks explain those requirements to clarify how to apply them.

  • NFPA® 54 ANSI Z223.1–2021 National Fuel Gas Code, 2021 Edition

    Chapter 1 Administration
    1.1 Scope.
    1.2 Purpose.
    1.3 Retroactivity.
    1.4 Equivalency.
    1.5 Enforcement.
    Chapter 2 Referenced Publications
    2.1 General.
    2.2 NFPA Publications.
    2.3 Other Publications.
    2.4 References for Extracts in Mandatory Sections.
    Chapter 3 Definitions
    3.1 General.
    3.2 NFPA Official Definitions.
    3.3 General Definitions.
    Chapter 4 General
    4.1 Qualified Agency.
    4.2 Interruption of Service.
    4.3 Prevention of Accidental Ignition.
    4.4 Noncombustible Material.
    4.5 Engineering Methods.
    Chapter 5 Gas Piping System Design, Materials, and Components
    5.1 Piping Plan.
    5.2 Interconnections Between Gas Piping Systems.
    5.3 Sizing of Gas Piping Systems.
    5.4 Operating Pressure.
    5.5 Piping Materials and Joining Methods.
    5.6 Gas Meters.
    5.7 Gas Pressure Regulators.
    5.8 Overpressure Protection Devices.
    5.9 Back Pressure Protection.
    5.10 Low-Pressure Protection.
    5.11 Shutoff Valves.
    5.12 Excess Flow Valve(s).
    5.13 Expansion and Flexibility.
    5.14 Pressure Regulator and Pressure Control Venting.
    Chapter 6 Pipe Sizing
    6.1 Pipe Sizing Methods.
    6.2 Sizing Natural Gas Piping Systems.
    6.3 Sizing Propane Piping Systems.
    6.4 Sizing Equations.
    Chapter 7 Gas Piping Installation
    7.1 Installation of Underground Piping.
    7.2 Installation of Aboveground Piping.
    7.3 Concealed Piping in Buildings.
    7.4 Piping in Vertical Chases.
    7.5 Gas Pipe Turns.
    7.6 Drips and Sediment Traps.
    7.7 Outlets.
    7.8 Manual Gas Shutoff Valves.
    7.9 Prohibited Devices.
    7.10 Systems Containing Gas–Air Mixtures Outside the Flammable Range.
    7.11 Systems Containing Flammable Gas–Air Mixtures.
    7.12 Electrical Bonding and Grounding.
    7.13 Electrical Circuits.
    7.14 Electrical Connections.
    Chapter 8 Inspection, Testing, and Purging
    8.1 Pressure Testing and Inspection.
    8.2 Piping System Leak Check.
    8.3 Purging Requirements.
    Chapter 9 Appliance, Equipment, and Accessory Installation
    9.1 General.
    9.2 Accessibility and Clearance.
    9.3 Air for Combustion and Ventilation.
    9.4 Appliances on Roofs.
    9.5 Appliances in Attics.
    9.6 Appliance and Equipment Connections to Building Piping.
    9.7 Electrical.
    9.8 Room Temperature Thermostats.
    Chapter 10 Installation of Specific Appliances
    10.1 General.
    10.2 Air-Conditioning Appliances.
    10.3 Central Heating Boilers and Furnaces.
    10.4 Clothes Dryers.
    10.5 Conversion Burners.
    10.6 Decorative Appliances for Installation in Vented Fireplaces.
    10.7 Gas Fireplaces, Vented.
    10.8 Direct Gas-Fired Heating and Forced Ventilation Appliances.
    10.9 Duct Furnaces.
    10.10 Floor Furnaces.
    10.11 Food Service Appliance, Floor-Mounted.
    10.12 Food Service Appliances, Counter Appliances.
    10.13 Household Cooking Appliances.
    10.14 Illuminating Appliances.
    10.15 Incinerators, Commercial-Industrial.
    10.16 Infrared Heaters.
    10.17 Open-Top Broiler Units.
    10.18 Outdoor Cooking Appliances.
    10.19 Pool Heaters.
    10.20 Refrigerators.
    10.21 Room Heaters.
    10.22 Stationary Gas Engines.
    10.23 Gas-Fired Toilets.
    10.24 Unit Heaters.
    10.25 Wall Furnaces.
    10.26 Water Heaters.
    10.27 Compressed Natural Gas (CNG) Vehicular Fuel Systems.
    10.28 Appliances for Installation in Manufactured Housing.
    10.29 Fuel Cell Power Plants.
    10.30 Outdoor Open Flame Decorative Appliances.
    10.31 Outdoor Infrared Heaters.
    Chapter 11 Procedures to Be Followed to Place Appliance in Operation
    11.1 Adjusting the Burner Input.
    11.2 Primary Air Adjustment.
    11.3 Safety Shutoff Devices.
    11.4 Automatic Ignition.
    11.5 Protective Devices.
    11.6 Checking the Draft.
    11.7 Operating Instructions.
    Chapter 12 Venting of Appliances
    12.1 Minimum Safe Performance.
    12.2 General.
    12.3 Specification for Venting.
    12.4 Design and Construction.
    12.5 Type of Venting System to Be Used.
    12.6 Masonry, Metal, and Factory-Built Chimneys.
    12.7 Gas Vents.
    12.8 Single-Wall Metal Pipe.
    12.9 Through-the-Wall Vent Termination.
    12.10 Condensation Drain.
    12.11 Vent Connectors for Category I Appliances.
    12.12 Vent Connectors for Category II, Category III, and Category IV Appliances.
    12.13 Draft Hoods and Draft Controls.
    12.14 Manually Operated Dampers.
    12.15 Automatically Operated Vent Dampers.
    12.16 Obstructions.
    Chapter 13 Sizing of Category I Venting Systems
    13.1 Additional Requirements to Single Appliance Vent.
    13.2 Additional Requirements to Multiple-Appliance Vent.
    Annex A Explanatory Material
    Annex B Sizing and Capacities of Gas Piping
    Annex C Suggested Method of Checking for Leakage
    Annex D Suggested Emergency Procedure for Gas Leaks
    Annex E Flow of Gas Through Fixed Orifices
    Annex F Sizing of Venting Systems Serving Appliances Equipped with Draft Hoods, Category I Appliances, and Appliances Listed for Use with Type B Vents
    Annex G Recommended Procedure for Safety Inspection of an Existing Appliance Installation
    Annex H Indoor Combustion Air Calculation Examples
    Annex I Example of Combination of Indoor and Outdoor Combustion and Ventilation Opening Design
    Annex J Enforcement
    Annex K Informational References
  • Ensure a safe fuel gas installation using the 2018 edition of NFPA 54/ANSI Z223.1, National Fuel Gas Code.

    NFPA 54, National Fuel Gas Code provides industry-accepted guidance for the safe installation and operation of fuel gas piping systems, appliances, equipment, and accessories. The 2018 edition includes updates based on recognized risks, recent research, and the techniques, materials, developments, and construction practices in use today. From design to installation, maintenance, and inspection -- no matter what aspect of fuel gas safety your job involves, the latest edition of the National Fuel Gas Code is essential.

    Update to the 2018 edition of the NFPA 54for greater confidence in CSST bonding.

    Be sure you're working with the most up-to-date information on the National Fuel Gas Code's bonding requirement for corrugated stainless steel tubing (CSST). All CSST used for fuel gas piping must be bonded to the building grounding system to prevent damage to the system due to nearby lightning strikes. In the 2018 edition, revisions to piping requirements include allowing listed arc-resistant jacket or coated CSST to use the appliance's electrical grounding connector as the bonding means and recognizing stainless steel smooth wall pipe and tubing products as acceptable piping materials.

    Other changes impact contractors, installers, and code officials:

    • The minimum allowed wall thickness of carbon and stainless steel pipe is revised to Schedule 10, however joints on Schedule 10 pipe cannot be made with screwed fittings.
    • Press-connect fittings are now an acceptable joining method for pipe.
    • Revisions to the venting requirements include requiring listing to the appropriate UL standards for plastic venting materials, factory-built chimneys, Type B and BW vents, chimney lining systems, and special gas vents.
    • Direct vent clearances to building openings for appliances with an input above 150,000 Btu (44 kW) are to be in accordance with the appliance manufacturer's installation instructions.
    • An existing gas appliance installation is required to be inspected for combustion air and venting code compliance when the building structure that it is installed in is modified with specific air infiltration-reducing changes.

    Annexes provide a wealth of additional information such as:

    • Details on coordinating appliance and equipment design, construction, and maintenance -- including a design and construction checklist
    • Steps on checking for leakage and suggested emergency procedures for gas leaks

    Never underestimate fuel gas dangers!

    The NFPA 54/ANSI Z223.1,National Fuel Gas Code provides the most effective means of ensuring fuel gas safety on consumers' premises. Update now for the latest pipe sizing tables; design requirements; installation provisions; inspection, testing, and purging requirements; and venting system rules that address fuel gas risks. (Print, Approx. 168 pp., 2018)

  • NFPA 54: National Fuel Gas Code provides the most effective means of ensuring fuel gas safety on consumers' premises.

    NFPA 54: National Fuel Gas Code provides critical guidance for the safe installation and operation of fuel gas piping systems, appliances, equipment, and accessories. Installers, designers, AHJs, maintainers, inspectors, and facility managers look to the Code for design requirements; inspection, testing, and purging requirements; pipe sizing tables; and venting system rules that address fuel gas risks. Each edition builds on the next, through consensus-based changes that reflect the evolving needs of the field and the latest information about fuel gas safety.

    • The 2015 NFPA 54: National Fuel Gas Code includes updates based on recognized risks, recent research, and the techniques, materials, developments, and construction practices in use today. From design to installation, maintenance, and inspection.
    • The 2012 NFPA 54 incorporates indoor gas piping purging rules that address recommendations by the U.S. Chemical Safety Board (CSB). In response to a devastating gas piping purging accident, NFPA 54 received an emergency Tentative Interim Amendment to the purging requirements in the 2009 Code. With minor editorial changes, the 2012 NFPA 54 presents these new rules specifying mandatory use of combustible gas indicators and detectors so employers can identify the presence of fuel gas. Other major changes improve safety and facilitate Code application; such as a new bonding clamp location for Corrugated Stainless Steel Tubing (CSST) gas piping that clarifies bonding requirements added in the 2009 edition.
    • The 2009 NFPA 54: National Fuel Gas Code reflects scores of proposals from the field. A new bonding requirement for Corrugated Stainless Steel Tubing (CSST) gas piping installed inside buildings helps protect against threats likely to energize gas piping. This edition also addresses a new system of connecting copper tubing using a crimping tool for press-connect fittings, and includes a new rule for a dedicated master shutoff valve for laboratories. Revised requirements for connectors to radiant tube heaters help prevent cracks, leaks, or fractures. Additional requirements for commercial cooking appliance connectors reduce the risk of fugitive gas, potential fires, and subsequent losses.
    • The 2006 NFPA 54: National Fuel Gas Code includes revised data that helps designers and engineers properly size longer installations; dozens of pipe sizing tables have been extended with information for all piping up to 2,000 feet. A first-time requirement addresses support of rooftop piping to protect against wind damage. Revised requirements for appliance shutoff valves allow manifold systems with all shutoff valves in one location up to 50 feet from the most remote appliance. Definitions are organized by categories, and chapters dealing with piping, installation, and venting are grouped together for ease of use.

    Interested in other editions of NFPA 54? Use the drop down menu above to select the edition year you need.

    (Video) Gas codes test 1

  • If you purchased a PDF, licensed PDFs can be accessed immediately. Instructions can be found in your order confirmation.

    Effective with the annual 2020 code cycle, NFPA® will no longer offer access to the PDF format as a choice for new editions of codes and standards, handbooks, or other reference titles. Existing PDFs will remain in-market and will still be accessible in our National Fire Codes® Subscription Service (NFCSS™). For more information about the different format options available to access essential code and standard content you need, click here.

  • NFPA®makes available PDF versions of some forms originally published in earlier editions of our NFPA Standards and handbooks. These eForms allow you to fill in the form fields electronically and then save, print, or share the file. NFPA eForms are intended for use on computers and are compatible with some mobile devices and apps. An internet connection is not needed to fill in and save the forms once they are downloaded to your device.

    NFPA eForms can be used with many PDF applications. Functions of the specific PDF application will work on the forms. For example, most PDF applications include a signature feature, allowing you to use your finger, stylus, or mouse to sign a document. Note that it is recommended that the eForms be viewed and filled in through Adobe Acrobat Reader or higher, and not using the default reader of your device, for example, the iOS reader on iPhones.

    Note that NFPA eForms are not compatible with the NFPA eLibrary app.

    Features of the NFPA eForms include:

    • Editable fields and checkboxes that allow you to enter content
    • Spell check
    • Easy file sharing (through email or Cloud storage)
    • Printing
    • Basic PDF markup tools, including highlighting and comment boxes
    • A "Learn More" button with explanatory comments to help you understand the requirements necessary to complete the form
    • Electronic signature
    • Searching form text
    • Table of contents with links to each form within the file
    • Dedicated placeholder to add company logo

    Additional features that may be available, depending on PDF software/app you choose:

    • Text message sharing of forms
    • Attaching files to PDF (including audio files)
    • Duplicating forms
    • Advanced tools, including inserting stamps and inserting images
    • Clearing all fields at once
    • Searching extended to include form fields
    • Extracting pages from the full file
    • Save'flattened' option that prevents further editing of content entered into form fields
    • Automatic saving when closing the file
    • Date fields with scroll bar selection

    Directions on how to use on a desktop or mobile device are provided on the first page of the PDF.

    • Calculating Pipe Size Using the Longest Length Method
    • Calculating Pipe Size Using the Branch Length Method
    • Sizing Combustion Air Using the Standard Method
    • Sizing Combustion Air Using the KAIR Method
    • Calculating the Size of Combustion Air Openings
    • Calculating the Size of Reduced Building Area Openings
    • Calculating Vent Size for Single Appliance
    • Calculating Vent Size for Two (or more) Appliances
  • Previous editions of NFPA® documents are available for sale. Please see applicable NFPA codes and standards product pages to confirm which editions are available for purchase. If you have any questions, contact NFPA Customer Support at 1-800-344-3555 or nfpa.org/customerservice.

  • (Video) Gas Pipe Bonding Requirements, NEC 2020 - [250.4(A)(4)], (12min:16sec)

    NFPA 54, National Fuel Gas Code Handbook

    More Info

    NFPA 54, National Fuel Gas Code Self-Adhesive Index Tabs

    Price: $21.50

    (Video) Natural Gas Pipe Sizing Longest Length Method NFPA 54 in Urdu/Hindi

FAQs

What is the ANSI Z223 1? ›

NFPA 54, ANSI Z223. 1 provides minimum safety requirements for the design and installation of fuel gas piping systems in homes and other buildings.

What is gas coding? ›

The gas cylinder colour code is indicative of the gas contained in the cylinder. The gas cylinder colour code system is designed to provide an instant visual cue identifying the contents for practical and safety reasons.

What is the maximum input rating allowed for an unvented heater installed in a bedroom according to NFPA 54? ›

All other models are too big. The National Fuel Gas Code (NFPA 54) permits wall mounted installation of vent-free gas heaters of 10,000 Btu's or less in bedrooms and 6,000 Btu's or less in bathrooms.

What code do we use for natural gas in Massachusetts? ›

248 CMR 4.00 through 8.00, collectively the Massachusetts Fuel Gas Code, governs the installation of fuel gas piping systems, fuel gas utilization equipment, and related accessories throughout the Commonwealth.

What is the code for venting a gas furnace? ›

503.6.

Gas vents shall terminate not less than 3 feet (914 mm) above any forced air inlet located within 10 feet (3048 mm).

Can CSA B149 1 Natural gas and propane installation code? ›

The CSA B149. 1 Natural gas and propane installation code has the largest impact of the B149 series codes on the gas fitting industry in BC. This is because it affects the installation of natural gas and propane piping systems, appliances and accessories, venting systems, and air requirements.

Videos

1. Understanding CO AirFree
(Bill Spohn)
2. PK MACH ENVI Video 1
(Allan Fala)
3. Installation Guidelines for Conversion Power Gas Burners
(Eastern Energy Expo)
4. Mike Holt Live Q&A Thursday May 7th 2020
(MikeHoltNEC)
5. Universal H Series & ASME Gas Heater Installation, Start-up and Troubleshooting
(Hayward Pool Products)
6. Plumbing, Fuel Gas, Acoustics Sound Transmission Part 1
(engrkaribul)
Top Articles
Latest Posts
Article information

Author: Prof. An Powlowski

Last Updated: 11/23/2022

Views: 5553

Rating: 4.3 / 5 (44 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Prof. An Powlowski

Birthday: 1992-09-29

Address: Apt. 994 8891 Orval Hill, Brittnyburgh, AZ 41023-0398

Phone: +26417467956738

Job: District Marketing Strategist

Hobby: Embroidery, Bodybuilding, Motor sports, Amateur radio, Wood carving, Whittling, Air sports

Introduction: My name is Prof. An Powlowski, I am a charming, helpful, attractive, good, graceful, thoughtful, vast person who loves writing and wants to share my knowledge and understanding with you.